PUMPKIN CAR STEREO SUPPORT CENTER

Hello,
Thanks for your message
Could you please offer us your order ID and SKU number of car stereo?
Best Regards
Autopumpkin


OH noooo, now it pops sometimes when turning ignition OFF

OK accidently i found the solution for my setup. Originally i had the ON signal for the amps connected to the Head unit's corresponding output cable labelled with "Amp Signal" (or similar). This cable was at 3,5V. One day, this signal was not enough anymore to power on one of my Amps but i...

YES, you nailed it! This does the trick. When setting what you write AND giving 12v signal on the "Cam Line" connector, the reverse cam activates automatically. For explaination and future readers: My problem was that the German translation of "Disable reverse video" was so misle...

Hello again :) I recently installed a reverse cam, it works when i connect it to aux Video in. But when i connect it to the Cam in" wire and Insert reverse gear, Nothing happens. I have canbus Adapter and i am not Sure which cable i need to cut and connect to reverse lamp for giving the signal ...

In a VW i attemted to use ignition Power but it was Not clear which it is, so i used the +12 that goes to the canbus decoder Adapter. Result: fail, battery drained and poppig noise sometimes yes, sometimes no. So far no solution here.

Thank you Jammy, this information saved me some time to find the correct setup.

Hello, I do not really have any troubles but just a setup question. Today i got this huge Subwoofer along with this amplifier. https://www.esxaudio.de/english/assets/se3500d.pdf Sure i connected the external amp to the corresponding output of the radio which enables me to control the bass power usin...